Full House DIY Tuning Kit

Description

This Full House DIY Tuning kit contains everything you need to DIY tune your own EA-AU Falcon!

The included J3 Chip and Programmer Pack gives you the ability to do your own tuning, but this Full House DIY Tuning kit also includes a TechEdge 2J Wideband o2 controller, and Bosch LSU 4.9 WBo2 Sensor to monitor your Air Fuel Ratios (AFRs) and data log other engine vitals.  Using this kit you not only have control of fuel, spark, idle, limiters and many other parameters within the ECU, but you can monitor and log AFR, TPS, Intake temp, Vehicle Speed, RPM and more!

This kit includes:

• Genuine Bosch LSU 4.9 Wideband O2 sensor
• TechEdge 2J9 Wideband O2 Controller
• 1.7m wideband sensor cable
• RJ45-DB9 RS232 Serial cable (for 2J9)
• Power cable
• J3 Chip
• J3 Programmer
• Mini USB Cable (for Programmer)

Use the drop down if you would like us to create you a Custom Tune as a base to get you started.  See Stage 1 / 2 Custom Tune and Stage 3 Custom Tune for more information about which tune type is required for your setup.

If your laptop does not have a 9-pin Serial port, you will need to add a USB Serial Cable.  You should also consider a TechEdge LD02 Wideband LED Display or TechEdge LA1 Round Wideband Gauge Display to be able to view your AFRs in the vehicle without needing a laptop.

V8 Falcons can log the MAF directly, but due to the type of MAP sensor in EA-EL 6 Cylinder Falcons, you will need a GM 2 Bar MAP Sensor to log MAP.

See related items for a Clip In J3 Chip Cover that can be used to secure the chip in place.

Note: Using this kit will require some knowledge of tuning – we recommend new starters have a good read of the tuning resources in our Library before purchasing.