Description
Boundary BA BF FG Falcon Barra 4L Billet Oil Pump Gears w/ MartenWear finish.
Made in the USA by Boundary Pump Division, these Barra billet oil pump gears are precision made to race tolerances based on two decades dedicated to developing high performance engine parts.
Designed to suit BA BF FG FG X Barra XR6 Turbo DOHC 4L engines from 300rwkw+. Avoid a nasty oil pump failure of the stock sintered gear and get your engine set up for high power.
- Made in the USA (not China)
- New mirror finish gears
- Cut in the hardened condition for the highest performing geometry
- True race geometry, more flow, more endurance, not a copy of OEM
- Tighter fitting crank geometry for more strength, and higher flow
- Double side surface ground for the tightest tolerances possible and ultra flat parts held to .001mm or .00004 inches or better
- Added MartenWear heat treatment increases surface hardness and reduces wear in extreme conditions
MartenWear heat treats the exterior surface of the part to be extremely hard and long wearing making the surface more robust against debris ingestion.
Specification:
- Vickers: 620 – 720
- Rockwell C: 55 – 60
- Tested wear free up to 13000rpm
For high performance builds, make sure you grab the Billet Oil Pump Backing Plate. We also have the timing cover gasket kit, Barra front crank seal, and Barra VCT solenoid gaskets available in our other listings as well as Threebond grey sealant so you can get it all back together without leaks.
Manufacturer Part Number: BA-OPG-M
Fedi (verified owner) –
Quality